diff options
| -rw-r--r-- | README.rst | 25 |
1 files changed, 18 insertions, 7 deletions
@@ -12,13 +12,24 @@ Ted's Cessna Knobox Materials --------- -- a friction-locked throttle knob (I used ) -- a vernier-style mixer knob (I used ) -- hardboard, 3.5mm in thickness -- M3 screws x4 for securing the potentiometers to the holders -- M2 screws x4 for securing the knob ends to the potentiometer sliders -- (M2.5/M3 screws + nuts) x4 for securing the holders to the enclosure -- you'll need to laster-cut the hardboard and 3D-print the holders/sliders +- Part I (mechanical) + + - a friction-locked throttle knob (I used `A820 <https://www.aircraftspruce.com/catalog/appages/a820.php>`_) + - a vernier-style mixer knob (I used `A790 <https://www.aircraftspruce.com/catalog/appages/a7902.php>`_) + - hardboard, 3.5mm in thickness + - M3 screws x4 for securing the potentiometers to the holders + - M2 screws x4 for securing the knob ends to the potentiometer sliders + - (M2.5/M3 screws + nuts) x4 for securing the holders to the enclosure + - you'll need to laster-cut the hardboard and 3D-print the holders/sliders + +- Part II (circuitry) + + - stmf103c8t6 board & ST-link programmer (something like https://www.ebay.com/itm/2pcs-STM32F103C8T6-ARM-STM32-Development-Board-Module-Blue-Pill-ST-Link-V2-USA/292168190439) + - slide potentiometer (10K, 88mm in length, https://www.amazon.com/gp/product/B07QVQ67MV/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1) + - 3 SPDT switches + 1 SPDT toggle switch + - 5 resistors (15K) + - micro-USB to USB type-A cable (https://www.ebay.com/itm/90-Degree-Left-Angled-Micro-USB-5pin-Male-to-USB-B-Female-Panel-Mount-Type-Cable/162358249642) + - (optional) mounting jig (https://www.amazon.com/gp/product/B07BHXXR4D/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 works very well, but you'll need to drill the holes yourself) 3D Printed Components --------------------- |