How to Use a Pretrained nnet Model from Kaldi ============================================= :author: Ted Yin (mfy43) :abstract: Instruct on how to pretrain a basic dnn with timit dataset using Kaldi and then convert the pretrained model to nerv format to let NERV finetune. Finally it shows two possible ways to decode the finetuned model in Kaldi framework. - Note: in this tutorial, we use the following notations to denote the directory prefix: - ````: the path of NERV (the location of outer most directory ``nerv``) - ````: the working directory of timit (the location of directory ``timit/s5``) - Locate the ``egs/timit`` inside Kaldi trunk directory. - Configure ``/cmd.sh`` and ``/path.sh`` according to your machine setting. - Open the ``/run.sh`` and locate the line saying :: exit 0 # From this point you can run Karel's DNN: local/nnet/run_dnn.sh . Uncomment this line. This is because in this tutorial, we only want to train a basic tri-phone DNN, so we simply don't do MMI training, system combination or fancy things like these. - Run ``./run.sh`` (at ````) to start the training stages. After that, we will get tri-phone GMM-HMM trained and the aligned labels. Let's move forward to pretrain a DNN. - Open ``/local/nnet/run_dnn.sh``, there are again several stages. Note that the first stage is what we actually need (pretraining the DNN), since in this tutorial we want to demonstrate how to get the pretrained model from stage 1, replace stage 2 with NERV (finetune per-frame cross-entropy), and decode using the finetuned network. However, here we add a line ``exit 0`` after stage 2 to preserve stage 2 in order to compare the NERV result against the standard one (the decode result using finetuned model produced by the original stage 2). - Run ``local/nnet/run_dnn.sh`` (at ````, for first two stages). - You'll find directory like ``dnn4_pretrain-dbn`` and ``dnn4_pretrain-dbn_dnn`` inside the ``/exp/``. They correspond to stage 1 and stage 2 respectively. To use NERV to do stage 2 instead, we need the pretrained network and the global transformation from stage 1: - Check the file ``/exp/dnn4_pretrain-dbn/6.dbn`` exists. (pretrained network) - Check the file ``/exp/dnn4_pretrain-dbn/tr_splice5_cmvn-g.nnet`` exists. (global transformation) - Run script from ``/speech/kaldi_io/tools/convert_from_kaldi_pretrain.sh`` to generate the parameters for the output layer and the script files for training and cross-validation set. - The previous conversion commands will automatically give identifiers to the parameters read from the Kaldi network file. The identifiers are like, for example, ``affine0_ltp`` and ``bias0``. These names should correspond to the identifiers used in the declaration of the network. Luckily, this tutorial comes with a written network declaration at ``/nerv/examples/timit_baseline2.lua``. - Copy the file ``/nerv/examples/timit_baseline2.lua`` to ``/timit_mybaseline.lua``, and change the line containing ``/speechlab`` to your own setting. - Start the NERV training by :: /install/bin/nerv /nerv/examples/asr_trainer.lua timit_mybaseline.lua (at ````). - ``/install/bin/nerv`` is the program which sets up the NERV environment, - followed by an argument ``/nerv/examples/asr_trainer.lua`` which is the script you actually want to run (the general DNN training scheduler), - followed by an argument ``timit_mybaseline.lua`` to the scheduler, specifying the network you want to train and some relevant settings, such as where to find the initialized parameters and learning rate, etc. - Finally, after about 13 iterations, the funetune ends. There are two ways to decode your model: - Plan A: - Open your ``timit_mybaseline.lua`` again and modify ``decode_param`` to your final chunk file (the file with an extension ``.nerv``) and your global transformation chunk file once used in training. This part lets the decoder know about the set of parameters for decoding. - Copy the script ``/nerv/speech/kaldi_io/README.timit`` to ```` and modify the paths listed in the script. - Run the modified ``README.timit`` (at ````). - After decoding, run ``bash RESULT exp/dnn4_nerv_dnn`` to see the results. - Plan B: In this plan, we manually convert the trained model back to Kaldi nnet format, and use Kaldi to decode. - Create a copy of ``/nerv/speech/kaldi_io/tools/nerv_to_kaldi.lua``. - Modify the list named ``lnames`` to list the name of layers you want to put into the output Kaldi parameter file in order. (You don't actually need to change for this tutorial) You may ask why the NERV-to-Kaldi converstion is so cumbersome. This is because Kaldi nnet is a special case of more general NERV toolkit --- it only allows stacked DNNs and therefore Kaldi-to-NERV conversion is lossless but the other direction is not. Your future NERV network may have multiple branches and that's why you need to specify how to select and "stack" your layers in the Kaldi parameter output. - Do the conversion by: :: cat your_trained_params.nerv your_global_trans.nerv > all.nerv /install/bin/nerv nerv_to_kaldi.lua timit_mybaseline.lua all.nerv your_kaldi_output.nnet - Finally, locate the directory of stage 2: ``/exp/dnn4_pretrain-dbn_dnn`` and temporarily change the symbolic link for the final network file to the converted one: :: cd /exp/dnn4_pretrain-dbn_dnn mv final.nnet final.nnet.orig ln -sv your_kaldi_output.nnet final.nnet Then proceed a normal Kaldi decoding.