From ddc4545050b41d12cfdc19cea9ba31c940d3d537 Mon Sep 17 00:00:00 2001 From: Determinant Date: Sat, 12 Mar 2016 13:36:59 +0800 Subject: adapt kaldi_decode propagator to the new arch --- tutorial/howto_pretrain_from_kaldi.rst | 98 +++++++++++++++++++++------------- 1 file changed, 60 insertions(+), 38 deletions(-) (limited to 'tutorial') diff --git a/tutorial/howto_pretrain_from_kaldi.rst b/tutorial/howto_pretrain_from_kaldi.rst index 8f6e0ad..2e8d674 100644 --- a/tutorial/howto_pretrain_from_kaldi.rst +++ b/tutorial/howto_pretrain_from_kaldi.rst @@ -1,9 +1,9 @@ -How to Use a Pretrained nnet Model from Kaldi -============================================= +How to Use a Pre-trained nnet Model from Kaldi +============================================== :author: Ted Yin (mfy43) -:abstract: Instruct on how to pretrain a basic dnn with timit dataset using - Kaldi and then convert the pretrained model to nerv format to let +:abstract: Instruct on how to pre-train a basic dnn with timit dataset using + Kaldi and then convert the pre-trained model to nerv format to let NERV finetune. Finally it shows two possible ways to decode the finetuned model in Kaldi framework. @@ -29,11 +29,11 @@ How to Use a Pretrained nnet Model from Kaldi - Run ``./run.sh`` (at ````) to start the training stages. After that, we will get tri-phone GMM-HMM trained and the aligned labels. Let's move forward to - pretrain a DNN. + pre-train a DNN. - Open ``/local/nnet/run_dnn.sh``, there are again several stages. - Note that the first stage is what we actually need (pretraining the DNN), - since in this tutorial we want to demonstrate how to get the pretrained model + Note that the first stage is what we actually need (pre-training the DNN), + since in this tutorial we want to demonstrate how to get the pre-trained model from stage 1, replace stage 2 with NERV (finetune per-frame cross-entropy), and decode using the finetuned network. However, here we add a line ``exit 0`` after stage 2 to preserve stage 2 in order to compare the NERV result @@ -44,10 +44,10 @@ How to Use a Pretrained nnet Model from Kaldi - You'll find directory like ``dnn4_pretrain-dbn`` and ``dnn4_pretrain-dbn_dnn`` inside the ``/exp/``. They correspond to stage 1 and stage 2 respectively. To use NERV to do stage 2 instead, we - need the pretrained network and the global transformation from stage 1: - + need the pre-trained network and the global transformation from stage 1: + - Check the file ``/exp/dnn4_pretrain-dbn/6.dbn`` exists. - (pretrained network) + (pre-trained network) - Check the file ``/exp/dnn4_pretrain-dbn/tr_splice5_cmvn-g.nnet`` exists. @@ -55,28 +55,46 @@ How to Use a Pretrained nnet Model from Kaldi - Run script from ``/speech/kaldi_io/tools/convert_from_kaldi_pretrain.sh`` to generate the parameters for the output layer and the script files for - training and cross-validation set. - - - The previous conversion commands will automatically give identifiers to the - parameters read from the Kaldi network file. The identifiers are like, for - example, ``affine0_ltp`` and ``bias0``. These names should correspond to - the identifiers used in the declaration of the network. Luckily, this - tutorial comes with a written network declaration at - ``/nerv/examples/timit_baseline2.lua``. + training and cross-validation set. A new diretory will be created at + ``/exp/dnn4_nerv_dnn`` with following files: + + - ``nnet_init.nerv``: the converted NERV chunk file containing all pre-trained parameters + - ``nnet_trans.nerv``: the converted NERV chunk file containing global transformation + - ``nnet_output.proto``: used for random generation of parameters (Kaldi) + - ``nnet_output.init``: the randomly generated parameters of output layer in Kaldi nnet format + - ``nnet_output.nerv``: the converted NERV chunk file containing parameters of output layer + - ``cv.scp``: the script file listing utterances for cross-validation + - ``train.scp``: the script file listing utterances for training + - ``train_sorted.scp``: sorted version of ``train.scp`` + - ``final.mdl``: HMM model, used for label generation and decoding + - ``ali_train_pdf.counts``: used for decoding + - ``tree``: used in decoding + + - The conversion commands in ``convert_from_kaldi_pretrain.sh`` will + automatically give identifiers to the parameters read from the Kaldi + network file. The identifiers are like, for example, ``affine0_ltp`` and + ``bias0``. These names should correspond to the identifiers used in the + declaration of the network. Luckily, this tutorial comes with a written + network declaration at ``/nerv/examples/timit_baseline2.lua``. + Have a look at ``nnet_init.nerv`` and ``timit_baseline2.lua``. - Copy the file ``/nerv/examples/timit_baseline2.lua`` to ``/timit_mybaseline.lua``, and change the line containing - ``/speechlab`` to your own setting. + ``/speechlab`` to your own setting. Also change the dimension of the output + layer to the number of tied phone states (change all ``1959`` to your number + of states, you can peek ``nnet_output.nerv`` to make sure), because each run + of previous Kaldi script would yield a slightly different number. - Start the NERV training by - + :: - + /install/bin/nerv /nerv/examples/asr_trainer.lua timit_mybaseline.lua (at ````). - - ``/install/bin/nerv`` is the program which sets up the NERV environment, + - ``/install/bin/nerv`` is the program which sets up the NERV + environment, - followed by an argument ``/nerv/examples/asr_trainer.lua`` which is the script you actually want to run (the general DNN training @@ -86,22 +104,26 @@ How to Use a Pretrained nnet Model from Kaldi specifying the network you want to train and some relevant settings, such as where to find the initialized parameters and learning rate, etc. -- Finally, after about 13 iterations, the funetune ends. There are two ways to - decode your model: - +- Finally, after about 13 iterations, the funetune ends. You will find the + trained models in directory named like ``nerv_*`` in your current working + directory. Used the one that has the highest cv (cross-validation) value and + ends with the extension ``.nerv``. There are two ways to decode your model: + - Plan A: - - - Open your ``timit_mybaseline.lua`` again and modify ``decode_param`` to - your final chunk file (the file with an extension ``.nerv``) and your - global transformation chunk file once used in training. This part lets - the decoder know about the set of parameters for decoding. - - Copy the script ``/nerv/speech/kaldi_io/README.timit`` to + - Open your ``timit_mybaseline.lua`` again and modify the first model in + ``decode_param`` to your final chunk file (the file with an extension + ``.nerv``) and your global transformation chunk file once used in + training (just keep it the same as the one in ``initialized_params``. + This configuration lets the decoder know about the set of parameters it + should use for decoding. + + - Copy the script ``/nerv/speech/kaldi_decode/README.timit`` to ```` and modify the paths listed in the script. - Run the modified ``README.timit`` (at ````). - - After decoding, run ``bash RESULT exp/dnn4_nerv_dnn`` to see the results. + - After decoding, run ``bash RESULTS exp/dnn4_nerv_dnn`` to see the results. - Plan B: In this plan, we manually convert the trained model back to Kaldi nnet format, and use Kaldi to decode. @@ -112,26 +134,26 @@ How to Use a Pretrained nnet Model from Kaldi put into the output Kaldi parameter file in order. (You don't actually need to change for this tutorial) You may ask why the NERV-to-Kaldi converstion is so cumbersome. This is because Kaldi nnet is a special - case of more general NERV toolkit --- it only allows stacked DNNs and + case of more general NERV toolkit -- it only allows stacked DNNs and therefore Kaldi-to-NERV conversion is lossless but the other direction is not. Your future NERV network may have multiple branches and that's why you need to specify how to select and "stack" your layers in the Kaldi parameter output. - Do the conversion by: - + :: - - /install/bin/nerv nerv_to_kaldi.lua timit_mybaseline.lua your_trained_params.nerv your_kaldi_output.nnet + + /install/bin/nerv --use-cpu nerv_to_kaldi.lua timit_mybaseline.lua .nerv .nnet - Finally, locate the directory of stage 2: ``/exp/dnn4_pretrain-dbn_dnn`` and temporarily change the symbolic link for the final network file to the converted one: :: - + cd /exp/dnn4_pretrain-dbn_dnn mv final.nnet final.nnet.orig - ln -sv your_kaldi_output.nnet final.nnet + ln -sv .nnet final.nnet Then proceed a normal Kaldi decoding. -- cgit v1.2.3-70-g09d2